1. Home
  2. YIHUA Product
  3. Soldering Station
    1. YIHUA-900H Lead Free High Frequency Soldering Station The soldering station has the power of 90W. It only requires several seconds for the temperature rising from 0℃ to 300℃.
      It has the password temperature lock function which can keep the unauthorized person from changing the machine parameters.
    1. YIHUA-936 Constant Temperature Soldering Station Our equipment applies the high quality ceramic heater which will not be twisted off and can be used for a long time.
      Manufactured with the new solid mold, it is resistant to pressure and impact.
    1. YIHUA-936A,YIHUA-937D+ Constant Temperature Soldering Station It is equipped with the imported high-power heater. Therefore, it is extremely suitable for desoldering large, complicated welded joints, in addition to the general small solder joints.
      Its handle wire is silicone wire which withstands high temperature and has good flexibility.
    1. YIHUA-936B Constant Temperature Soldering Station It won’t result in any damage to the delicate component, as the result of the anti-static design.
      Its heater is made of qualified ceramic. It can be used for a long time without any damage.
      Moreover, the equipment applies the blue ferroalloy iron holder, and its bottom is fixed with sponge.
    1. YIHUA-937BD+/939BD+ Constant Temperature Soldering Station Equipped with the high-power Hakko heater, it is suitable for all the desoldering applications, especially those large, complicated solder joints. This anti-static soldering station will cause no damage to the delicate components.
    1. YIHUA-942 Anti-Static Soldering StationSAMSUNG SCM, PID program are applied for the real-time tracking, correcting the air gun air inlet temperature and soldering iron tip temperature. The PID temperature correction cycle is 100ms. The surprising temperature compensation speed makes the machine suitable for all sorts ...
    1. YIHUA-950 Lead Free High Frequency Soldering StationA buzzer has been installed inside the rework station. It alarms when the temperature reaches the set value, abnormal conditions occurs, or when the soldering station goes dormant or is automatically power off.
      The whole machine works stably with high-level configuration.
    1. YIHUA-9936 Portable Soldering StationIt applies integrated design with high-efficient switching power supply and power control system. Controlled by the SAMSUNG microcomputer PID, it allows for fast warming. Only 15 seconds are required for the temperature rising from 30℃ to 300℃.

Soldering Station

The soldering station is a hand tool frequently used for electronics soldering. It heats the solder and then uses the melt solder to connect the workpieces. This product has a wide range of application. It can be used for the electronic communication products maintenance, electronic integrated circuit, chips, etc.

The soldering station should have the anti-static function. Currently, it has two types of temperature control methods. The simplest one is the adjustable electric quantity control method. The soldering station realizes the temperature control through using the soldering iron to speedily transfer heat to the workpiece. Another temperature control method is of relatively higher grade. This method uses the chip to check the soldering tip temperature. Then, it uses the program comparison to adjust the on-off of the temperature controller, thus achieving the temperature control effect. When the soldering tip temperature is lower than the set temperature, you should connect the machine, and supply power to the temperature controller for heating. You need to stop the machine, once the soldering tip temperature is higher than the set temperature.

Our soldering station applies the PID temperature control method, which allows for the temperature control precision reaching 20ms per cycle.

Related Names
Electronics Soldering Equipment | No Lead Soldering Tools | Electrical Appliance Rework Station